Prices From: £18.22 ex VAT
Use to sterilise containers, fresh water pipe work, tanks and cooking utensils used for food preparation or drinking water. Sterilisation is the only method of ensuring that all bacteria and spores have been killed – spores are bacteria in a dormant state. For general disinfecting add 2% Steriliser M to cold or luke warm water. Apply to the surface by spray, cloth or mop. Suitable for use as a soak bath. No need to rinse. Allow to dry naturally.
Sterilisation of micro organisms is the only method of ensuring that all bacteria and spores have been killed. Spores are bacteria in a dormant (non-active) state. They have a very tough coating around them and are very difficult to destroy. Steriliser M kills bacteria and spores found in containers, fresh water pipe work, tanks, utensils and other items used for food preparation or drinking water. Steriliser M is formulated to leave surfaces clean and sterile.
Every surface that has been in contact with the solution will be ready to use after 15 minutes. Utensils can be left in solution for 24 hours until you need to use them again. Wash your hands before removing any utensils from the solution. There is no need to rinse surfaces after treatment. When treating pipework and tanks make sure no air bubbles are trapped to ensure all surfaces are fully covered with the solution. For general disinfecting add 2% Steriliser M to cold or warm water. Apply to the surface by spray, cloth or mop. No need to rinse. Suitable to use as a soak bath. Allow to dry naturally.
Pack size: 1 x 1 litre, 1 x 5 litre
Battery terminal corrosion appears as a white ash deposit around one or both battery posts. Battery Terminal Protector prevents damp, greasy, dirty or corroded battery terminal and improves electrical continuity. The spray leaves a flexible non conductive film which removes any trace of existing corrosion from battery terminals and inhibits the formation of further corrosion. Pack size: 1 x 400ml aerosol tin
Carburettor and Fuel Injection Cleaner enables fast cleaning of carburettors and other similar engine components without the necessity to dismantle. It cleans carburettors, injector throttle bodies, plates, chokes, butterflies, jets and linkages etc. and helps reduce engine emissions Pack size: 1 x 500ml aerosol tin
Stainless Steel Cleaner protects and cleans all stainless steel surfaces. Suitable for use on kitchen equipment such as fridge freezers, bulk tankers, industrial pipework, shop fittings and all other stainless steel surfaces, leaving a fine protective coating which polishes to a sheen finish.
Floor Wash is a concentrated acidic based floor cleaner that effectively removes grease and contaminants on concrete floors, block paving and slabs. Surface preparation of concrete floors to remove grease, oil and dirt prior to painting or sealing is essential to prevent bubbling and lifting of the surface treatment. Floor Wash removes grease and contaminants leaving the surface ready for further treatment and finishing. Floor Wash can also be used to remove light deposits of concrete.
