Prices From: £18.22 ex VAT
Use to sterilise containers, fresh water pipe work, tanks and cooking utensils used for food preparation or drinking water. Sterilisation is the only method of ensuring that all bacteria and spores have been killed – spores are bacteria in a dormant state. For general disinfecting add 2% Steriliser M to cold or luke warm water. Apply to the surface by spray, cloth or mop. Suitable for use as a soak bath. No need to rinse. Allow to dry naturally.
Pack size: 1 x 1 litre, 1 x 5 litre.
Sterilisation of micro organisms is the only method of ensuring that all bacteria and spores have been killed. Spores are bacteria in a dormant (non-active) state. They have a very tough coating around them and are very difficult to destroy. Steriliser M kills bacteria and spores found in containers, fresh water pipe work, tanks, utensils and other items used for food preparation or drinking water.
Steriliser M is formulated to leave surfaces clean and sterile. Every surface that has been in contact with the solution will be ready to use after 15 minutes. Utensils can be left in solution for 24 hours until you need to use them again. Wash your hands before removing any utensils from the solution. There is no need to rinse surfaces after treatment. When treating pipework and tanks make sure no air bubbles are trapped to ensure all surfaces are fully covered with the solution
Directions: For general disinfecting add 2% Steriliser M to cold or luke warm water. Apply to the surface by spray, cloth or mop. No need to rinse. Suitable to use as a soak bath. Allow to dry naturally.
An Acrylic formulation gloss black aerosol paint that is suitable for automotive, marine and a wide variety of industrial and domestic applications rejuvenating parts and accessories. Dries to a gloss black finish Pack size: 1 x 500ml aerosol tin
Battery terminal corrosion appears as a white ash deposit around one or both battery posts. Battery Terminal Protector prevents damp, greasy, dirty or corroded battery terminal and improves electrical continuity. The spray leaves a flexible non conductive film which removes any trace of existing corrosion from battery terminals and inhibits the formation of further corrosion. Pack size: 1 x 400ml aerosol tin
Penetrating oil, also known as penetrating fluid, is very low viscosity oil. It can be used to free rusted mechanical parts so that they can be removed, because it can penetrate into the narrow space between the threads of two parts. A low viscosity oil formulated to free rusted mechanical parts so that they can be more easily removed. It cleans and provides resistance against corrosion. The product is supplied as a clear oil to avoid staining of surfaces. Immediately after application the product will create a waterproof load bearing coating that lubricates and protects. Rapid penetration to release seized and rusted components. A high quality clear penetrating release oil Pack size: 1 x 400ml aerosol tin
Moisture Repellent is a penetrating lubricant which protects against corrosion, displaces moisture and lubricates parts. Instantly displaces moisture from damp or wet components. Penetrates and frees nuts, bolts and seized metal parts. Ideal for marine use. A blend of penetrant and release agents with anti corrosion additives Pack size: 1 x 450ml aerosol tin
