Price: £5.62 ex VAT
Graffiti Remover is a solvent based cleaner that is formulated for the rapid removal of felt tip, biro, paints, overspray, vinyl label adhesive, tar, protective film adhesive etc.
Pack size: 1 x 450ml aerosol
Graffiti Remover is a solvent based cleaner that is formulated for the rapid removal of felt tip, biro, paints, overspray, vinyl label adhesive, tar, protective film adhesive etc. Avoid prolonged contact with plastic and vinyl surfaces. Removes graffiti from on brickwork, concrete, bus shelters, monuments, road signs, tiles, laminates, glass etc. Safe to use on the plastic panels of Portable toilets. If in doubt about using Graffiti Remover on the surface being treated, apply a small test amount to an inconspicuous area to make sure there is no adverse reaction.
Directions: on porous surfaces wet the surface with clean water prior to application of Graffiti Remover. Apply Graffiti Remover directly on to the surface to be treated. If necessary agitate with a brush to assist removal then rinse with fresh water. For best results rinse using pressurised water. On heavy deposits repeat the process if necessary.
Green Actifresh 14 inch Gauntlet fleece lined for comfort. Chemical and waterproof. Suitable for use in most chemical cleaning applications. Use of gloves helps maintain effective hand hygiene and reduces the risk of spreading virus and bacteria infection Pack size: per pair
Penetrating oil, also known as penetrating fluid, is very low viscosity oil. It can be used to free rusted mechanical parts so that they can be removed, because it can penetrate into the narrow space between the threads of two parts. A low viscosity oil formulated to free rusted mechanical parts so that they can be more easily removed. It cleans and provides resistance against corrosion. The product is supplied as a clear oil to avoid staining of surfaces. Immediately after application the product will create a waterproof load bearing coating that lubricates and protects. Rapid penetration to release seized and rusted components. A high quality clear penetrating release oil Pack size: 1 x 400ml aerosol tin
Floor Wash is a concentrated acidic based floor cleaner that effectively removes grease and contaminants on concrete floors, block paving and slabs. Surface preparation of concrete floors to remove grease, oil and dirt prior to painting or sealing is essential to prevent bubbling and lifting of the surface treatment. Floor Wash removes grease and contaminants leaving the surface ready for further treatment and finishing. Floor Wash can also be used to remove light deposits of concrete. Pack size: 1 x 5 litre, 1 x 25 litre, 1 x 205 litre
400ml CFC free aerosol to remove label adhesive, ink and gum deposits from most hard surfaces. A unique blend of solvents break down the ink or adhesive Pack size: 1 x 400ml aerosol tin
