Prices From: £14.92 ex VAT
Deacale A is a heavy duty descaler for boiler systems , pressure washers etc. It is formulated to remove contaminants and lime scale build up. Hard water contains calcium and magnesium ions. When hard water is heated these salts form as hard scale inside hot water appliances and adjoining pipe work. The build up of scale will continue as more and more salts are deposited and will this lead to blocked hot water heat exchangers, particularly in Combination Boilers
Pack size: 1 x 5 litre
Descale A is a heavy duty acid based boiler descaler also suitable for descaling pressure washer boilers.It removes rust, contaminants and lime scale build up which can cause failure of systems. Hard water contains calcium and magnesium ions. When hard water is heated these salts form as hard scale inside hot water appliances and adjoining pipe work. The build up of scale will continue as more and more salts are deposited and will this lead to blocked hot water heat exchangers, particularly in Combination Boilers. Descale A cleans corrosion deposits from radiator systems and main heat exchangers of a boiler and removes hard water deposits out of a combination boiler. Descaling is needed when a heat exchanger accumulates a significant thickness of calcium on it’s surface, enough to insulate the water from the heat source and impair performance. This effect usually only occurs on heat exchangers that carry fresh tap water.
Sealed systems such as radiator circuits usually contain an inhibitor. There will be a small amount of calcium that was contained in the initial fill of water but once this has precipitated there is no more left to deposit. Fresh tap water particularly in hard water areas, will constantly deposit calcium resulting in very thick layers of scale which can virtually seal off all water flow in extreme cases. Combination boilers and thermal stores suffer from this in particular. Symptoms of scale build up include reduced water flow, reduced temperature, wildly fluctuating water temperature, or any combination of these.
Directions: add Descale A to the system and run until all contaminants are removed. Drain down and repeat if necessary. Fully flush the system with fresh water after use. In sealed systems add an inhibitor to the system to prevent further build up of scale.
Carburettor and Fuel Injection Cleaner is supplied in a 400ml aerosol that enables fast cleaning of carburettors and other similar engine components without the necessity to dismantle. It cleans carburetors, injector throttle bodies, plates, chokes, butterflies, jets and linkages etc. and helps reduce engine emissions Pack size: 1 x 400ml aerosol tin
Maintenance Spray is a high quality heavy duty lubricant and release agent for general workshop use. Cleans and lubricates moving mechanical parts. Displaces moisture leaving surfaces treated anti rust and corrosion resistant. Ideal for use on garden equipment and general plant equipment to ensure it all functions like new. Pack size: 1 x 400ml aerosol tin
A strong multi purpose water based hard surface cleaner and degreaser. Must be diluted to required strength. An full concentrate formula that is effective for the removal of most stubborn deposits from hard surfaces. Effective for the removal of most stubborn deposits from hard surfaces including floors and work surfaces, garage forecourts, kitchen floors, degreasing plant and equipment etc. Pack size: 1 x 5 litre, 1 x 25 litre, 1 x 205 litre
Galv is a zinc rich primer coating which prevents corrosion of welded fittings and metal surfaces. It provides a durable bright finish and long term protection to steel against rust and corrosion. Quick and easy to apply Pack size: 1 x 400ml aerosol tin
