Prices From: £14.92 ex VAT
Deacale A is a heavy duty descaler for boiler systems , pressure washers etc. It is formulated to remove contaminants and lime scale build up. Hard water contains calcium and magnesium ions. When hard water is heated these salts form as hard scale inside hot water appliances and adjoining pipe work. The build up of scale will continue as more and more salts are deposited and will this lead to blocked hot water heat exchangers, particularly in Combination Boilers
Pack size: 1 x 5 litre
Descale A is a heavy duty acid based boiler descaler also suitable for descaling pressure washer boilers.It removes rust, contaminants and lime scale build up which can cause failure of systems. Hard water contains calcium and magnesium ions. When hard water is heated these salts form as hard scale inside hot water appliances and adjoining pipe work. The build up of scale will continue as more and more salts are deposited and will this lead to blocked hot water heat exchangers, particularly in Combination Boilers. Descale A cleans corrosion deposits from radiator systems and main heat exchangers of a boiler and removes hard water deposits out of a combination boiler. Descaling is needed when a heat exchanger accumulates a significant thickness of calcium on it’s surface, enough to insulate the water from the heat source and impair performance. This effect usually only occurs on heat exchangers that carry fresh tap water.
Sealed systems such as radiator circuits usually contain an inhibitor. There will be a small amount of calcium that was contained in the initial fill of water but once this has precipitated there is no more left to deposit. Fresh tap water particularly in hard water areas, will constantly deposit calcium resulting in very thick layers of scale which can virtually seal off all water flow in extreme cases. Combination boilers and thermal stores suffer from this in particular. Symptoms of scale build up include reduced water flow, reduced temperature, wildly fluctuating water temperature, or any combination of these.
Directions: add Descale A to the system and run until all contaminants are removed. Drain down and repeat if necessary. Fully flush the system with fresh water after use. In sealed systems add an inhibitor to the system to prevent further build up of scale.
Battery terminal corrosion appears as a white ash deposit around one or both battery posts. Battery Terminal Protector prevents damp, greasy, dirty or corroded battery terminal and improves electrical continuity. The spray leaves a flexible non conductive film which removes any trace of existing corrosion from battery terminals and inhibits the formation of further corrosion. Pack size: 1 x 400ml aerosol tin
Cleans and protects all stainless steel surfaces. Suitable for use on kitchen equipment such as fridge freezers, bulk tankers, industrial pipework, shop fittings and all other stainless steel surfaces. Available in a ready to use trigger spray or as a concentrate to leave a fine protective coating which polishes to a sheen finish. Pack size 1 x 750ml trigger spray Pack size: 1 x 5 ltr, 1 x 25 ltr
Maintenance Spray is a high quality heavy duty lubricant and release agent for general workshop use. Cleans and lubricates moving mechanical parts. Displaces moisture leaving surfaces treated anti rust and corrosion resistant. Ideal for use on garden equipment and general plant equipment to ensure it all functions like new. Pack size: 1 x 400ml aerosol tin
Safe Rinse is a catering strength automatic dishwasher non smear rinse aid that is alcohol IPA based. Saferinse is also suitable for use in enclosed cabinet glass wash machines. This product is supplied as a concentrate for injection into the final rinse cycle by dosage control equipment or by the dishwasher itself. Use of Safe Rinse ensures rapid drying and streak free results, helping to reduce scale build up inside the dishwasher unit. Pack size: 1 x 5 litres, 1 x 25 litres
