Take Off polish stripper

Description

Take Off is a powerful non ammonia floor polish stripper formulated to rapidly penetrate metalised floor polishes. A formulated blend of non caustic alkalis, solvents and specialised additives to enable the removal of emulsion polishes without the need for machine scrubbing. Ideal for floors treated with emulsion polishes and seals. Take Off can also be used with a rotary floor machine fitted if required. Maximum dilution for Take Off is 1 part to 50 parts water

• Removal of heavy polish or sealants: dilute with up to 50 parts of warm water. Mop the solution onto the floor. Leave to soak for up to 10 minutes but do not allow to dry out. Apply more solution if necessary. Mop away slurry using warm water, or remove using a wet vacuum machine. Allow the floor to fully dry before applying polish.
• Machine Stripping: dilute with 10 parts water. Mop solution onto the floor and machine scrub using a rotary machine fitted with a stripping pad. Remove any residue using a wet vacuum machine or mop thoroughly using warm water and allow to dry. New polish may be applied when the surface is dry.
• Spray Stripping: dilute with 20 parts water. Spray a fine mist over the surface and scrub thoroughly using a rotary machine fitted with a stripping pad. Remove any residue using either a wet pick up machine or by mopping. Damp mop the floor with clean water and allow to dry.

Pack size: 1 x 5 litres. Boxed quantity 4 x 5 litres