Prices From: £18.22 ex VAT
Use to sterilise containers, fresh water pipe work, tanks and cooking utensils used for food preparation or drinking water. Sterilisation is the only method of ensuring that all bacteria and spores have been killed – spores are bacteria in a dormant state. For general disinfecting add 2% Steriliser M to cold or luke warm water. Apply to the surface by spray, cloth or mop. Suitable for use as a soak bath. No need to rinse. Allow to dry naturally.
Pack size: 1 x 1 litre, 1 x 5 litre.
Sterilisation of micro organisms is the only method of ensuring that all bacteria and spores have been killed. Spores are bacteria in a dormant (non-active) state. They have a very tough coating around them and are very difficult to destroy. Steriliser M kills bacteria and spores found in containers, fresh water pipe work, tanks, utensils and other items used for food preparation or drinking water.
Steriliser M is formulated to leave surfaces clean and sterile. Every surface that has been in contact with the solution will be ready to use after 15 minutes. Utensils can be left in solution for 24 hours until you need to use them again. Wash your hands before removing any utensils from the solution. There is no need to rinse surfaces after treatment. When treating pipework and tanks make sure no air bubbles are trapped to ensure all surfaces are fully covered with the solution
Directions: For general disinfecting add 2% Steriliser M to cold or luke warm water. Apply to the surface by spray, cloth or mop. No need to rinse. Suitable to use as a soak bath. Allow to dry naturally.
Galv is a zinc rich primer coating which prevents corrosion of welded fittings and metal surfaces. It provides a durable bright finish and long term protection to steel against rust and corrosion. Quick and easy to apply Pack size: 1 x 400ml aerosol tin
Penetrating oil, also known as penetrating fluid, is very low viscosity oil. It can be used to free rusted mechanical parts so that they can be removed, because it can penetrate into the narrow space between the threads of two parts. A low viscosity oil formulated to free rusted mechanical parts so that they can be more easily removed. It cleans and provides resistance against corrosion. The product is supplied as a clear oil to avoid staining of surfaces. Immediately after application the product will create a waterproof load bearing coating that lubricates and protects. Rapid penetration to release seized and rusted components. A high quality clear penetrating release oil Pack size: 1 x 400ml aerosol tin
400ml CFC free aerosol to remove label adhesive, ink and gum deposits from most hard surfaces. A unique blend of solvents break down the ink or adhesive Pack size: 1 x 400ml aerosol tin
Blits is a very strong cleaner degreaser that will readily remove heavy soiling. It is water based and suitable for use on most hard surfaces including floors. Blits is a high pH alkaline based formulation that must be pre diluted with water prior to use. Removes grease, carbon deposits and ink from hard surfaces including concrete and quarry tiles. Blits is suitable for use in Industrial environments, Workshops, Plant, Catering & Agriculture where a strong water based cleanser degreaser is required. Pack sizes 1 x 5 litre, 1 x 25 litre
