Prices From: £18.22 ex VAT
Use to sterilise containers, fresh water pipe work, tanks and cooking utensils used for food preparation or drinking water. Sterilisation is the only method of ensuring that all bacteria and spores have been killed – spores are bacteria in a dormant state. For general disinfecting add 2% Steriliser M to cold or luke warm water. Apply to the surface by spray, cloth or mop. Suitable for use as a soak bath. No need to rinse. Allow to dry naturally.
Pack size: 1 x 1 litre, 1 x 5 litre.
Sterilisation of micro organisms is the only method of ensuring that all bacteria and spores have been killed. Spores are bacteria in a dormant (non-active) state. They have a very tough coating around them and are very difficult to destroy. Steriliser M kills bacteria and spores found in containers, fresh water pipe work, tanks, utensils and other items used for food preparation or drinking water.
Steriliser M is formulated to leave surfaces clean and sterile. Every surface that has been in contact with the solution will be ready to use after 15 minutes. Utensils can be left in solution for 24 hours until you need to use them again. Wash your hands before removing any utensils from the solution. There is no need to rinse surfaces after treatment. When treating pipework and tanks make sure no air bubbles are trapped to ensure all surfaces are fully covered with the solution
Directions: For general disinfecting add 2% Steriliser M to cold or luke warm water. Apply to the surface by spray, cloth or mop. No need to rinse. Suitable to use as a soak bath. Allow to dry naturally.
Air Duster is a compressed air duster aerosol designed to clean or dust delicate items such as electronic equipment, computer keyboards and other sensitive devices that cannot be cleaned using water or solvent based cleansers. Powerful compressed air jet action. Leaves no residue. Pack size: 1 x 300ml aerosol tin
Graffiti Remover is a solvent based cleaner that is formulated for the rapid removal of felt tip, biro, paints, overspray, vinyl label adhesive, tar, protective film adhesive etc. Pack size: 1 x 450ml aerosol
Blits is a very strong cleaner degreaser that will readily remove heavy soiling. It is water based and suitable for use on most hard surfaces including floors. Blits is a high pH alkaline based formulation that must be pre diluted with water prior to use. Removes grease, carbon deposits and ink from hard surfaces including concrete and quarry tiles. Blits is suitable for use in Industrial environments, Workshops, Plant, Catering & Agriculture where a strong water based cleanser degreaser is required. Pack sizes 1 x 5 litre, 1 x 25 litre
400ml CFC free aerosol to remove label adhesive, ink and gum deposits from most hard surfaces. A unique blend of solvents break down the ink or adhesive Pack size: 1 x 400ml aerosol tin
