Prices From: £22.35 ex VAT
Safe Seal is an emulsion sealer formulated to provide a tenacious grip on all hard surface floors including linoleum, laminate, concrete and cork tile. Protects floors against oil and grease leaving a hard semi gloss transparent finish. Use on all hard surface floors including linoleum, laminate, concrete and cork tile. Use to seal porous surfaces prior to the application of Slick floor polish
Pack size: 1 x 5 litre, 1 x 25 litre Boxed quantity 4 x 5 litres
Safe Seal is an emulsion floor sealer formulated to protect floors against oil and grease leaving a hard semi gloss transparant finish. Use on all hard surface floors including linoleum, laminate, concrete and cork tile. Use to seal porous surfaces prior to the application of Slick floor polish. This undercoat sealant will extend the life of the floor and polish. Not suitable for use on outside flooring.
Safe Seal is suitable for use in factories, office, home, coach bus and train floors, floors in mobile accommodation, tiles, cork and timber floors. It can also be used to seal concrete, stone and other porus surfaces.
Directions: Use as supplied. Apply a thin coat using a soft broom. Leave to dry for 2-8 hours. If required apply a second coat and allow to dry. Do not use in temperatures below 5C
Pack size: 1 x 5 litre, 1 x 25 litre. Boxed quantity 4 x 5 litres
White Grease is formulated as a general purpose maintenance grease which sprays like a penetrant but sets like a grease. It is formulated to penetrate and lubricate. Reduces friction and wear. Use to lubricate hinges and catches and for parts that are being reassembled. White Grease is water and heat resistant for the long term protection of bolts, doors mechanisms, chains, hinges and other moving or sliding parts. Formulated to be non hardening, non drip and non staining. Supplied as a 400ml aerosol Pack size: 1 x 400ml aerosol tin
Graffiti Remover is a solvent based cleaner that is formulated for the rapid removal of felt tip, biro, paints, overspray, vinyl label adhesive, tar, protective film adhesive etc. Pack size: 1 x 450ml aerosol
Red 17" diameter floor pads to fit floor scrubber/buffing machines to remove light floor soiling and buff to a high shine Pack size - box of 5 pads
Penetrating oil, also known as penetrating fluid, is very low viscosity oil. It can be used to free rusted mechanical parts so that they can be removed, because it can penetrate into the narrow space between the threads of two parts. A low viscosity oil formulated to free rusted mechanical parts so that they can be more easily removed. It cleans and provides resistance against corrosion. The product is supplied as a clear oil to avoid staining of surfaces. Immediately after application the product will create a waterproof load bearing coating that lubricates and protects. Rapid penetration to release seized and rusted components. A high quality clear penetrating release oil Pack size: 1 x 400ml aerosol tin
