Prices From: £14.92 ex VAT
Deacale A is a heavy duty descaler for boiler systems , pressure washers etc. It is formulated to remove contaminants and lime scale build up. Hard water contains calcium and magnesium ions. When hard water is heated these salts form as hard scale inside hot water appliances and adjoining pipe work. The build up of scale will continue as more and more salts are deposited and will this lead to blocked hot water heat exchangers, particularly in Combination Boilers
Pack size: 1 x 5 litre
Descale A is a heavy duty acid based boiler descaler also suitable for descaling pressure washer boilers.It removes rust, contaminants and lime scale build up which can cause failure of systems. Hard water contains calcium and magnesium ions. When hard water is heated these salts form as hard scale inside hot water appliances and adjoining pipe work. The build up of scale will continue as more and more salts are deposited and will this lead to blocked hot water heat exchangers, particularly in Combination Boilers. Descale A cleans corrosion deposits from radiator systems and main heat exchangers of a boiler and removes hard water deposits out of a combination boiler. Descaling is needed when a heat exchanger accumulates a significant thickness of calcium on it’s surface, enough to insulate the water from the heat source and impair performance. This effect usually only occurs on heat exchangers that carry fresh tap water.
Sealed systems such as radiator circuits usually contain an inhibitor. There will be a small amount of calcium that was contained in the initial fill of water but once this has precipitated there is no more left to deposit. Fresh tap water particularly in hard water areas, will constantly deposit calcium resulting in very thick layers of scale which can virtually seal off all water flow in extreme cases. Combination boilers and thermal stores suffer from this in particular. Symptoms of scale build up include reduced water flow, reduced temperature, wildly fluctuating water temperature, or any combination of these.
Directions: add Descale A to the system and run until all contaminants are removed. Drain down and repeat if necessary. Fully flush the system with fresh water after use. In sealed systems add an inhibitor to the system to prevent further build up of scale.
Penetrating oil, also known as penetrating fluid, is very low viscosity oil. It can be used to free rusted mechanical parts so that they can be removed, because it can penetrate into the narrow space between the threads of two parts. A low viscosity oil formulated to free rusted mechanical parts so that they can be more easily removed. It cleans and provides resistance against corrosion. The product is supplied as a clear oil to avoid staining of surfaces. Immediately after application the product will create a waterproof load bearing coating that lubricates and protects. Rapid penetration to release seized and rusted components. A high quality clear penetrating release oil Pack size: 1 x 400ml aerosol tin
Hypoclean is an industrial strength stabilised bleach. It is suitable for cleaning most hard surfaces to kill virus, bacteria and algae deposits. Use regularly as part of your anti virus and anti bacteria protection programme Pack size: 1 x 5 litre, 1 x 25 litre
Galv is a zinc rich primer coating which prevents corrosion of welded fittings and metal surfaces. It provides a durable bright finish and long term protection to steel against rust and corrosion. Quick and easy to apply Pack size: 1 x 400ml aerosol tin
An Acrylic formulation gloss black aerosol paint that is suitable for automotive, marine and a wide variety of industrial and domestic applications rejuvenating parts and accessories. Dries to a gloss black finish Pack size: 1 x 500ml aerosol tin