Truck Wash E

Description

Truck Wash E is a general purpose Traffic Film Remover, also known as a TFR or Truck Wash. It is formulated for use as a cleaner  on vehicles, chassis. industrial plant, machinery, flooring etc. The product is free rinsing and economic in use. It is safe to use on all types of paintwork, glass, plastic and rubber surfaces.  Always fully wet surfaces to be cleaned prior to applying the TFR. Do not allow to dry on during the cleaning process.

Directions:  Apply by pressure washer or jet wash set at 2% at the nozzle or pre dilute the product with up to maximum 20 parts water and adjust the washer setting accordingly. Always apply from the bottom upwards for best results. Wipe over using a sponge, soft brush or clean cloth to loosen soiling. Rinse off using clean water. For hand washing of vehicles dilute Truck Wash E with clean water. Maximum dilution would be of 1 part to 40 parts water. Wet the surfaces to be cleaned prior to application of the product. Apply TFR using a sponge or soft cloth. Clean as normal then fully rinse using fresh clean water. This product is also suitable for use in conjunction with barrel feed systems and forecourt coin operated pressure wash systems.

For cleaning workshop floors dilute as required dependent on the degree of soiling. Apply to the floor and scrub with a stiff brush to remove soiling. Rinse with clean water – ideally under pressure. Allow to dry before sealing or painting the floor.

Pack size: 1 x 5 litre, 1 x 25 litre, 1 x 205 litre